Jonsered CC2128 Operator's Manual page 9

GENERAL SAFETY PRECAUTIONS
Cutting equipment
Saw blades are intended for cutting fibrous
types of wood.
Grass blades and grass cutters are
intended for cutting coarse grass.
A trimmer head is intended for trimming
grass.
General rules
Only use cutting attachments with the
guards we recommend! See the section on
Technical data.
Keep the teeth of the blade correctly sharp-
ened! Follow our instructions and use the
recommended file gauge. An incorrectly
sharpened or damaged blade increases the
risk of accidents.
Keep the correct setting on the saw blade!
Follow our instructions and use the recom-
mended setting tool. An incorrectly set saw
blade increases the risk of jamming and
blade thrust, and damage to the saw blade.
115305026 Rev. 3 7/15/10
Check the cutting attachment for damage
or cracks. A damaged cutting attachment
should always be replaced.
Sharpening grass cutters and
grass blades
S See the cutting attachment packaging for
correct sharpening instructions. Sharpen
blades and cutters using a single- -cut flat file.
S Sharpen all edges equally to maintain the
balance of the blade.
WARNING:
Always discard a
blade that is bent, twisted, cracked,
broken or damaged in any other
way. Never attempt to straighten
a twisted blade so that it can be re-
used. Only use original blades of
the specified type.
Sharpening the saw blade
S See the cutting attachment packaging for
correct sharpening instructions.
S A correctly sharpened blade is essential for
working efficiently and to avoid unnecessary
wear to the blade and clearing saw.
S Make sure that the blade is well supported
when you file it. Use a 5.5 mm round file
with a file holder.
English--- 9