Technical Data - Jonsered GR2026L Operator's Manual

Technical data

Technical data
Engine
Cylinder displacement, cu.in/cm
Cylinder bore, inch/mm
Stroke, inch/mm
Idle speed, rpm
Recommended max. speed, rpm
Speed of output shaft, rpm
Max. engine output, acc. to ISO 8893, kW/ rpm
Catalytic converter muffler
Speed-regulated ignition system
Ignition system
Manufacturer/type of ignition system
Spark plug
Electrode gap, inch/mm
Fuel and lubrication system
Manufacturer/type of carburetor
Fuel tank capacity, US pint/litre
Weight
Weight without fuel, cutting attachment and guard, Lbs/kg
Sound levels
(see note 1)
Equivalent noise pressure level at the operator's ear,
measured according to EN/ISO 11806 and ISO 7917, dB(A),
min./max.:
Vibration levels
Vibration levels at handles, measured according to
2
ANSI B175.3-1997, m/s
At idle, left/right handles, min.:
At idle, left/right handles, max.:
At max. speed, left/right handles, min.:
At max. speed, left/right handles, max.:
Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under various
working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.
NOTE! Noise pressure at the user's ear and vibration on the handles are measured with all the machine's approved cutting
equipment fitted. The table indicates the highest and lowest values.
Approved accessories
Centre hole in blades/cutters, Ø 25,4 mm
Arbor shaft thread M10
Plastic blades
Trimmer head
Edger (CL)
Hedge trimmer (CL)
TECHNICAL DATA
3
Type
Polytrim Ø 300
Tap-N-Go 35
Auto32
S35
Edger attachment Ø 200 mm
Hedge trimmer attachment
GR 2026L/CL GR 2032L
1,64/26,9 1,88/30,8
1,38/35 1,38/35
1,10/28 1,26/32
2700 2700
11000-11700 11000-11700
10000 10000
0,9/9000 1,1/8400
Yes Yes
Yes Yes
Walbro CD Walbro CD
NGK BPMR 7A/ NGK BPMR 7A/
Champion RCJ 7Y Champion RCJ 7Y
0,02/0,5 0,02/0,5
Walbro WT Walbro WT
1,06/0,5 1,06/0,5
L: 12,6/5,7 CL: 13,2/6,0 13,7/6,2
95/99 92/100
2,8/2,0 2,5/2,3
2,8/2,0 4,0/3,0
2,6/2,8 3,8/2,7
5,0/5,0 6,8/3,4
Cutting attachment guard, Art. no.
503 74 50-03
503 74 50-03
503 74 50-03
503 74 50-03
-
-
English
– 23