Oce OP1030 Operation Manual page 16

2. Set-up
• Date/Time and Time Difference
Sets the required area information for the Send E-mail
function.
The time of day when email is sent from the scanner is
included in the header of that email message as the trans-
mission time. Perform the following procedure in order to set
the date and time in your area, as well as the time difference
to GMT (Greenwich Mean Time).
Press the Default Setting/Counter key. The Default
1
Setting screen will appear.
Touch the "Machine default" key. The Machine
2
Default screen will appear.
Use the numeric keys on the keypad to enter the
3
administrator password number. The factory default
setting for 30 ppm machines is "3000", for 40 ppm
machines is "4000" and for 50 ppm machines is
"5000".
* If the entered number matches the registered one,
the Scanner Setting menu will appear.
* It is possible for you to change the administrator
password number as desired. For more information,
refer to the Operation Guide for your copier.
2-6
Use the "s" and "t" cursor keys to select "Time
4
difference" and then touch the "Change #" key. The
Time Difference Setting screen will appear.
Use the "+" and "–" keys to change the setting as
5
desired. Touch the "Close" key to register the change
to that setting.
Ex.: Time difference
Use the " " and " " cursor keys to select "Date/
6
Time" and then touch the "Change #" key. The Date/
Time Setting screen will appear.
Use the "+" and "–" keys to change the setting as
7
desired. Touch the "Close" key to register the change
to that setting.
* Be sure to set the time difference first and then the
date and time.
* If you change both of "Summertime" and "Date/
Time" setting, "Summertime" setting will be invalid.
(Washington) GMT -5:00
(London) GMT 0:00