Items Shown On The Display Panel - Toshiba 3560 Service Manual

5.2 Items Shown on the Display Panel

5.2.1 Display during normal copying
No. Message
1 WAIT WARMING UP
2 READY
3 COPYING
4 SAVING ENERGY
PRESS PRINT
5 PLACE NEXT
ORIGINAL
6 —
3560/70 DISPLAY
Conditions of machine
Being warmed up
• Indicated after the main switch
is switched on up until the
machine becomes capable of
copying.
Capable of copying.
• Indicated when the machine is
capable of copying and the
operator's instructions for
copying conditions are awaited.
• Returns to the initial condition
if no key input is given for 45
seconds.
Now copying.
• Indicated by pressing the
PRINT key.
• Copy quantity indicator becomes
"1" and copying is completed.
Energy saving conditions.
ADU 1-sided copying standby
state. A below.
Timer off
• No message is displayed in the
panel except for timer LED.
5 - 2
Notes
• The number and reproduction ratio
of the copies are indicated, for
example, as "0", "100%" when the
main switch comes on.
• Copy quantity indicator indicates as
"1". When a digital key is pressed,
the set number is indicated.
• The set number is cleared to "1" by
pressing the CLEAR/STOP key.
• Manual copying is possible.
• After completion of copying, the copy
quantity indicator returns to the
initially set number.
• Released by pressing the ENERGY
SAVER key or the PRINT key.
• When using ADU 1-sided, and when
not using ADF.
• Released by pressing the PRINT
key.
A
Nov. 1997 © TOSHIBA