Burner Grates - GE Ranges Self-Cleaning Gas Dual Fuel Owner's Manual

Cleaning The Cooktop (Cont.)

Burner Grates

Grates should be washed in hot, soapy water and
rinsed with clean water. To soften burned-on food,
household ammonia for several hours. Afterward, scrub
grates with a plastic scouring pad soaked in hot, soapy
Cleaning the Grates in the Self-Clean Oven
If your cooktop grates do not have rubber bumpers on
their bottom surface and your oven racks are coated
with black porcelain, your grates may be cleaned in
the oven using the self-clean cycle. If your grates have
rubber bumpers, do not attempt to clean your grates in
the oven. Doing so will destroy the rubber bumpers and
may affect the function of your surface burners.
4
rack. Follow instructions for the self-clean mode in the
Cleaning the Oven section of this manual.
NOTE:
oven after the self-clean cycle has ended. The grates
may still be hot.
Grate Support Bumpers
If any of the rubber grate support bumpers in the cooktop
are missing or damaged, replacement parts can be
To insert the new bumpers, simply place the
cone-shaped end of the bumper into the hole in the
cooktop and push down while gently twisting the bumper.
Griddles
Griddle Precautions:
If something has spilled under the griddle, it should be
cleaned up as soon as possible to prevent the spill from
getting baked onto the cooktop.
Do not allow grease to accumulate under the griddle as
it can be a fire hazard. Clean under the griddle with hot
soapy water as soon as it is cool.
Do not wash your griddle in the dishwasher.
Do not place your griddle in a microwave oven.
49-85217-1
When replacing the grates, be sure to locate them
correctly on the cooktop. Grates are identified by the
words LEFT and RIGHT on their bottom surfaces. Grate
should fit securely into the cooktop.
Grates will gradually lose their shine due to their
continual exposure to high temperatures.
After cleaning, you may notice a white residue on the
grates. Wipe it off with a damp sponge. If white spots
and water.
R 2
The oven has 6 rack positions. Place the gray porcelain-coated racks
in positions "R", "2" and "4" for self-cleaning the grates.
Grate Support Bumpers
25