Using The Sleep Timer; Recording - Sony STR-DH710 Operating Instructions Manual

Using the Sleep Timer
You can set the receiver to turn off
automatically at a specified time.
AMP
f2~/.--I+---l0~@~
I.-r-H......
MENU
(j'~C
1
Press AMP MENU.
2
Press
+'+
repeatedly to select
"SYSTEM", then press
8
or
+.
3
Press
+'+
repeatedly to select
"SLEEP", then press
8
or
+.
4
Press
+'+
repeatedly to select
the preset time you want, then
press
8.
The display changes as follows:
OFF -
0-30-00 -1-00-00-
1-30-00 - 2-00-00
When sleep timer is being used. "SLEEP"
indicator lights up in the display.
Tips
• To check the remaining time before the receiver
turns off. repeat steps I to 3. The remaining time
appears on the display.
• A count down is displayed I minute before the
recei ver turns off.
44
GB
Recording
You can record from a video/audio component
using the receiver. Refer to the operating
instructions supplied with your recording
component.
RfJcording; ontoaCO--R
You can record onto a CD-R using the
receiver. Refer to the operating instructions
supplied with your CD recorder.
1
Press one of the input buttons
to select the playback
component.
You can also use INPUT SELECTOR on
the recei ver.
2
Prepare the playback
component for playing.
For example, tune to the radio station you
want to record (page 45).
3
Prepare the recording
component.
Insert a blank CD-R into the CD recorder
and adjust the recording level.
4
Start recording on the
recording component, then
start playback on the playback
component.
Note
Sound adjustments do not affect the signal output
from the SA-CD/CD/CD-R AUDIO OUT jacks.