Sony STR-DH710 Operating Instructions Manual page 96

Multi channel av receiver
Hide thumbs Also See for STR-DH710:
Table of Contents

Advertisement

3)INPUT SHORT (with sound field and equalizer
bypassed).
4)Weighted network, input level.
FM tuner section
Tuning range
87.5 MHz - 108.0 MHz
Antenna (aerial)
FM wire antenna (aerial)
Antenna (aerial) terminals
75 ohms, unbalanced
Intermediate frequency
10.7 MHz
Specifications
AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
(Models of area code U2 only)
With 8 ohm loads, both channels driven, from
20 - 20,000 Hz; rated 95 watts per channel
minimum RMS power, with no more than
0.09% total harmonic distortion from 250
milliwatts to rated output.
Amplifier section
Models of area code U2
1 )
Minimum RMS Output Power
(8 ohms, 20 Hz - 20 kHz, THO 0.09%)
95 W +95 W
Stereo Mode Output Power
(8 ohms, I kHz, THD 1%)
105 W + 105 W
Surround Mode Output Powe.-2)
(8 ohms, 1 kHz, THO 10%)
140 W per channel
Models of area code CA2, AUl, SA2, TW21)
Minimum RMS Output Power
(8 ohms, 20 Hz - 20 kHz, THD 0.09%)
85W +85 W
Stereo Mode Output Power
(8 ohms, 1 kHz, THO 1%)
100W + 100W
Surround Mode Output Powe.-2)
(8 ohms, 1 kHz, THD 10%)
140 W per channel
I)Measured under the following conditions:
Frequency response
Analog
Input
Analog
Digital (Coaxial)
Digital (Optical)
Output (Analog)
AUOIOOUT
SUBWOOFER
Equalizer
Gain levels
AM tuner section
Tuning range
Area code
U2,CA2
10 Hz -70 kHz,
+0.5/-2 dB (with sound
field and equalizer
bypassed)
Sensitivity: 500 mV/
50 kohms
SIN
3 ):
96 dB
(A, 500 mV 4 »
Impedance: 75 ohms
SIN:
100 dB
(A, 20 kHz LPF)
SIN:
100 dB
(A, 20 kHz LPF)
Voltage: 500 mV/
10 kohms
Voltage: 2 V II kohm
±6 dB, I dB step
Tuning scale
10kHz step
9 kHz step
530 kHz
~
531 kHz-
1,710 kHz
1,710 kHz
Area code
U2, CA2
Power requirements
120 V AC, 60 Hz
AU 1, SA2, TW2
531 kHz-
1,602 kHz
2)Reference power output for front, center,
surround, surround back and front high speakers.
Depending on the sound field settings and the
source, there may be no sound output.
AU1, SA2
TW2
230 V AC, 50 Hz
110 V AC, 60 Hz
Antenna (aerial)
Loop antenna (aerial)
Intermediate frequency
450 kHz
96
G8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents