Table of Contents
Advertisement
Troubleshooting
conflicts with the operation of a Bridgedecor.exe file, executed on boot. To repair this
problem, go into Windows Safe Mode and disable the Virtual Private Networking Adapter.
You can disable the Adapter by right clicking on your Network Neighborhood Icon and click-
ing on properties. This will list all adapters installed on your computer. Right click and
select disable on the adapter labeled Virtual Private Networking. This will allow
Bridgedecor.exe to startup correctly on boot.
6. Will HomePlug operate on different Circuit Breakers?
Yes. Circuit breakers do not affect performance of HomePlug devices, however the signal
will not pass through the power transformers outside your house.
7. Can Neighbors get my HomePlug signal?
It is possible for your immediate (next door) neighbor to receive residual signal from your
HomePlug adapter. Unlikely, but possible. To prevent your neighbors from hacking your
network, the best thing you can do is type a different encryption password into your device
when setting the encryption password. Note: All devices must have the same password to
65
Advertisement
Table of Contents
