Security - Zte -J G730 User Manual

ZTE-J G730/G740/G750/G780 GoTa Digital Mobile Phone User Manual
2. Press the Up/Down Key to select AM/PM or 24 Hours as the
time format.

Security

The phone password is needed to enter the Security interface.
Generally, the default password is: "0000". Once you get a new
phone, it is recommended to modify the password to guarantee the
safety of information.
1. Require PIN
Notes: If your phone needs UIM card, please read the
following contents; otherwise skip this section.
i In standby mode, select Menu > Settings > Security;
ii Input the password, and select OK;
iii Select Require PIN;
iv Press the Up/Down Key to select On or Off, and input the
PIN code and select OK to activate the function. When it is
set as On, the phone requires PIN code of UIM card to power
on.
2. Change Password
i In standby mode, select Menu > Settings > Security;
ii Input the password, and select OK;
iii Select Change Password;
iv Enter the old password, and select OK;
v Enter the new password, and select OK;
vi Enter new password again, and select OK.
vii Select OK to save it.
3. Change PIN
i In standby mode, select Menu > Settings > Security;
ii Input the password, and select OK;
iii Select Change PIN;
61