Event Report Settings - IOGear BOSS GNS1000 GNS1000 GNS1000 User Manual

System Management

9.2 Event Report Settings

The Event Report Setting is used to send the admin-
istrator an e-mail alert once an event occurs on the
system. If you select the Disable radio button in Alarm
Mail, the system will not send an alarm to anyone. To
enable the function, please follow the steps:
1. Select Enable radio button in Alarm Mail.
2. Enter the IP Address or Domain Name of the Mail
Server. (e.g. 111.22.33.4 or mail.your.net)
3. Enter the e-mail address (e.g. admin@mail.your.net)
that you want the system to send e-mail to if an event
occurs.
4. Select "Normal" or "Warning" in Alert Level to indicate
when to send the e-mail. If you select "normal,"
events with a normal level will induce the system to
send e-mail to the administrator's e-mail.
5. Click the Apply button.
62