IOGear BOSS GNS1000 GNS1000 GNS1000 User Manual page 29

After completing your configuration, each time the BOSS™ boots, it will try to connect with your ISP and the
ISP will assign the BOSS™ an external IP address. If you would like to connect immediately, you can click
on the Connect symbol. Once successfully connected, the Status field should reflect this. If the Status is still
the same, check to make sure that the username, password, cables, etc. are all correct
ADSL/PPTP Client Setting
If your ISP provides a PPTP server, you could set
up the PPTP client here.
Please follow the steps:
Select the ADSL/PPTP radio button.
1.
2.
Enter the user name. (You get this from your ISP)
Enter the password. (You get this from your ISP)
3.
Enter the IP address of your computer in My IP
4.
Address.
5. Enter the IP address of the server in Server IP
Address.
In the following chapters, we will cover more
details in configuring your BOSS™.
27
Installation