Scansnap Manager - Fujitsu ScanSnap S1500 Installation And Troubleshooting Manual

5.
Select the software from which you want to remove the installation
information.

ScanSnap Manager

1. Select [ScanSnap Manager] and click the [Remove] button.
A confirmation message appears.
2. Click the [Yes] button.
A message appears to check whether or not to remove the profile information.
3. Click the [Yes] button to remove and the [No] button to keep the profile information.
ATTENTION
If the problem persists when you kept the profile information then reinstalled the software, try
again after removing the profile information.
The installation information is removed, and the following message appears.
4. Click the [OK] button to close the [Remove Installation Information] dialog box.
If you have installed the software before
17