Mobile Unit Coding - Miele G 7825 Operating Instructions Manual

Automatic mobile unit recognition (Optional)

Mobile unit coding

The automatic mobile unit recognition
feature assigns a programme place to a
mobile unit. The mobile units must be
coded with a magnetic strip (via a Bit
combination).
In operating level C, the only
programme available for a coded
mobile unit is the one assigned to the
corresponding programme place.
After a coded mobile unit has been put
into the machine and the door closed,
the automatic mobile unit recognition
system will select the allocated
programme.
,
Make sure that there are no
small metallic objects or instrument
parts attracted to the magnetic strip,
in particular to the underside of it.
Any metallic objects on the strip can
result in the coding being incorrectly
read.
Press 6 to start the programme.
18
Coding is effected through 5 Bits:
– Bits 1 to 4 define the mobile unit
code,
– Bit 5 serves as a control (Parity Bit).
Bit 6 controls the volume of inflowing
water and the circulation pump for
mobile units with side coupling (WAK).
Its settings cannot be altered.
Mobile units without side coupling are
coded with tracks which do not contain
Bit 6.