Technical Data - Miele G 7825 Operating Instructions Manual

Technical data

Height:
Width:
Depth:
Weight (net):
Operating weight:
Voltage:
Rated load:
Fuse rating:
Compressed air connection:
Steam connection (with electric TA): 250 - 1000 kPa (2.5 - 10 bar) / 140 - 180 °C
Steam connection (with steam TA):
Water pressure (flow rate):
Hot, cold and de-ionised (AD) water: up to max. 70 °C
Ambient temperature
Altitude
Noise level in dB (A):
Sound level LpA
Test marks:
! mark:
*) if the steam pressure lies between 250 - 300 kPa (2.5 – 3.0 bar) the steam
drying unit (TA) will only reach a max. drying temperature of 90 - 100 °C.
#
If installed at altitudes above 1500 m the boiling point of the suds solution will be
lower. Disinfecting temperature parameters should be lowered and the holding
time increased (A
52
value).
0
200 cm (minimum room height without
steam condenser)
260 cm (minimum room height with steam
condenser)
90 cm
75 cm
approx. 505 kg
approx. 665 kg
see data plate
see data plate
see data plate
600 kPa (6.0 bar) required for steam
operation
250 - 600 kPa* (2.5 - 6 bar) / 140 -164 °C
200 -1000 kPa (2 - 10 bar) pressure
from 5 °C to 40 °C
#
Max. 1500 m
for the cleaning cycle: <70
for the drying cycle: <70
VDE, interference suppression, DVGW
MPG-Guidelines 93/42/EWG, Class IIa