Main Menu
Table of Contents
Lights
CONNECTOR
INNER FENDER
3.
Remove the electrical connector
from the bulb by pushing on the
tab and pulling the connector
down.
4.
Remove the bulb from the fog
light assembly by turning it one-
quarter turn counterclockwise.
400
Replacing Rear Bulbs
(in Rear Pillar)
COVER
1.
Open the tailgate. Use a
screwdriver protected with a cloth
to pry open the two covers.
BOLT
BOLT
2.
Remove the two bolts, and remove
the rear light assembly from the
rear pillar.
3.
Determine which of the two bulbs
is burned out: turn signal/hazard
lights or side marker light.