Acura 2007 MDX Owner's Manual page 285

Main Menu Table of Contents
Setting Up the System
The voice of the HFL can be set to
male or female (U.S. models only).
Also, the incoming notification can
be set to a ring tone, a prompt, or no
notification.
To set up the system, do this:
1. Press and release the Talk button.
After the beep, say ''System.'' The
HFL response is, ''System options
are setup and clear.''
2. Press and release the Talk button.
After the beep, say ''Setup.'' The
HFL response is ''Would you like
male or female prompts?''
Press and release the Talk button.
3.
After the beep, say ''Male'' or
''Female,'' depending on the
system voice you want. The HFL
response is, ''Male (Female)
prompts have been selected.
Would you like an audible
notification of an incoming call?''
4. Press and release the Talk button.
If you say ''Yes'' after the beep, the
HFL response is, ''Would you like
the notification to be a ring tone or
a prompt?'' If you say ''No'' after
the beep, the HFL returns to its
main menu. Saying ''No'' will result
in no ring tone or prompt playback
during an incoming call. The audio
system will still mute, and a
message will be displayed.
HandsFreeLink
Press and release the Talk button.
5.
After the beep, say ''Ring tone'' or
''Prompt.'' The HFT system
response is ''A ring tone will be
used.'' or ''An incoming call
prompt will be used.''
If you choose ''Ring tone,'' you will
hear a ring tone through the audio
speakers to announce an incoming
call. If you choose ''Prompt,'' you
will hear this message to
announce an incoming call: ''You
have an incoming call.''
6. The HFL response continues ''A
security option is available to lock
the HFL. Each time the vehicle is
turned on, a passcode would be
required to use this system. Would
you like this security option turned
on?'' If you say ''Yes,'' you can set
your passcode. Refer to the setting
procedure in the next column.
TM
281