Acura 2007 MDX Owner's Manual page 204

Main Menu Table of Contents
Playing the AM/FM Radio (Models with navigation system)
STEREO ICON
To Play the AM/FM Radio
The ignition switch must be in the
ACCESSORY (I) or the ON (II)
position. Press the AUDIO button to
view the audio control display. Turn
the system on by pressing the
power/volume knob or the AM/FM
button. Adjust the volume by turning
the power/volume knob.
200
The band and frequency that the
radio was last tuned to are shown on
BAND
the display. To change bands, press
the AM/FM button. You can also
change bands by pushing the
interface selector up. Each time you
push it up, the band will change to
FM1, FM2, or AM. On the FM bands,
STEREO will be shown on the
navigation screen and ST on the
audio display, if the station is
broadcasting in stereo. Stereo
reproduction on AM is not available.
To Select a Station
You can use any of five methods to
find radio stations on the selected
band:
TUNE, SEEK, SCAN,
preset buttons, and
TUNE
tune the radio to a desired frequency.
Turn the knob right to tune to a
higher frequency, or left to tune to a
the lower frequency. To tune with the
. interface dial, push the selector
AUTO SELECT
down, and turn the knob to TUNE.
Then press ENTER on the selector,
and turn the knob to the desired
frequency. To exit the TUNE mode,
press ENTER on the selector.
TUNE ICON
Use the TUNE knob to