Air Filter; Fuel Filter - Echo SRM-211 Operator's Manual

Grass trimmer/brush cutter
Table of Contents

Advertisement

AIR FILTER

Level 1.
Tools required: 25 - 50 mm (1 - 2 in.) Cleaning Brush
Parts required: 90008 REPOWER
1. Close choke (Cold Start Position). This prevents dirt from
entering the carburetor throat when the air filter is removed.
Brush accumulated dirt from the air cleaner area.
2. Remove the air cleaner cover. Clean and inspect the element for
damage. If element is fuel soaked and very dirty, replace.
3. If element can be cleaned and reused, be certain it:
•still fits the cavity in the air cleaner cover.
•is installed with the original side out.
NOTE
Carburetor adjustment may be needed after air filter cleaning/
replacement.

FUEL FILTER

Level 1.
Tools required: 203 - 254 mm (8 - 10 in.) length of wire with one end
bent into a hook, Clean rag, funnel, and an approved fuel container
Parts required: 90008 REPOWER
WARNING
Fuel is VERY flammable. Use extreme care when mixing, storing or
handling, or serious personal injury may result.
1. Use a clean rag to remove loose dirt from around fuel cap and
empty fuel tank.
2. Use the "fuel line hook" to pull the fuel line and filter from the
tank.
3. Remove the filter from the line and install the new filter.
G
TM
AIR & FUEL FILTER KIT.
TM
AIR & FUEL FILTER KIT.
DANGER
T
/B
RASS
RIMMER
O
PERATOR
C
RUSH
UTTER
'
M
S
ANUAL
29

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Srm-211u

Table of Contents