General Functions
User Preset modes allow you to change the initial copy mode, if
necessary.
User preset mode; general
select item
00 Finisher mode default
01 Staple position
02 Power on default mode
03 Manual add toner
04 User information change
1 / 2
Screen
Modes
No.
00 Finisher mode default
01 Staple position setting
02 Power on default mode
1/2
03 Manual add toner
04 User information change
05 Hard disk status
06 Departmental counter
2/2
07 Page numbering style
08 Hole punch default
09 Key operator mode
∗
Not needed in copying mode, but needed when installing options for
NOTE
advanced functions (see page 99).
User preset mode; general
OK
select item
Nonsort
05 Hard disk status
Front
06 Departmental counter
Copy
07 Page numbering style
OFF
08 Hole punch default
09 Key operator mode
Selects finisher mode.
C Non-sort, Sort, Sort/Staple, Group
Selects staple position.
C Front, Rear, Booklet
∗
Selects mode.
C Copy or Filing
Allows the addition of toner as determined by
operator. Toner is rapidly added after selecting
ON and touching OK.
C OFF, ON
∗
Allows changing user information as determined
by operator. After user ID is entered or card is
inserted, the following items can be changed.
C User ID, Password.
∗
Hard disk condition will indicate on the
screen for 3 seconds.
Copy usage and copy limit of selected
department and total copy usage will appear
on the screen for 3 seconds.
Selects numbering style
C -n- or n/m (ex: -1- or 1/10)
Selects hole punch mode
C OFF, ON
Input key operator ID code.
User Preset
OK
-n-
OFF
2 / 2
Function
Initial setting
Non-sort
Front
Copy
OFF
-n-
OFF
41