Winding The Bobbin - Singer S18 Instruction Manual

2
2
3
3
4
5
6
7
1
1
4
5

Winding the Bobbin

Step 1
Pass the thread through the thread guide on the
thread guide post from behind.
1 Thread guide bar
Step 2
Pass the thread under the bobbin winding
tension disk.
2 Bobbin winding tension disk
Step 3
Thread through the hole in the bobbin from the
inside to the outside.
3 Bobbin winder spindle
Step 4
Put the bobbin on the bobbin winder spindle.
Push the bobbin winder stopper to the left.
4 Bobbin winder stopper
Step 5 6
Hold the free end of the thread in your hand
and press the bobbin winding button.
Press the bobbin winding button again to stop
the bobbin when it has made several turns, and
cut the thread close to the hole in the bobbin.
5 Bobbin winding button
Step 7
Press the bobbin winding button again. When
the bobbin is fully wound, the machine will stop
automatically.
Return the bobbin winder stopper to its original
position and cut the thread.
®
The SINGER Studio™ S18 sewing machine has an
independent motor for bobbin winding. Bobbins can
be wound while sewing.
15