Customizing Individual Stitch Patterns (Mode 2 And 3 Only); Storing And Recalling The Stitch Pattern Combinations - Singer S18 Instruction Manual

1
2
3
4
1
4
5
3
1
2
6
Customizing individual stitch patterns
(Mode 2 and 3 only)
The stitch width and length can be individually edited for
each stitch pattern in a programmed combination.
How to alter the stitch width and length of a single
pattern in a combination
Step 1
Press the Edit button to shift the cursor under the pattern
you wish to alter.
Step 2 and 3
Press the stitch width adjusting button to reduce the
width to "5.0".
Press the stitch length adjusting button to reduce the
length to "1.5".
Step 4
The edited combination sewn.
Programing Tips:
To view the stitch pattern setting of each stitch pattern,
shift the cursor under the desired stitch pattern then press
the stitch width or length adjusting button. The settings will
be displayed at the bottom center of the LCD screen. If
you press the stitch width or length adjusting button when
the cursor is on the right of the last programmed stitch
pattern, a custom adjustment will be cancelled and uniform
adjustment will be applied.
Storing and recalling stitch pattern combinations
A stitch pattern combination will be kept in the memory for
future use even after turning the machine off.
The stored stitch pattern combination can be recalled by
selecting the Mode where the combination was sewn.
Then press the memory/recall button after turning the
machine on.
Programing Tips:
If you store a new pattern combination, the previously
stored combination will be deleted.
One pattern combination can be stored in each mode.
To store a stitch pattern combination
Step 1
Program a stitch pattern combination.
Step 2
Press the memory/recall button. An hourglass will
appear for a while and the pattern combination will be
stored.
Step 3
Turn the machine off.
To recall the stored pattern combination
2
Step 4
Wait 15 seconds and turn the machine on.
Step 5
Select the mode in which you have stored the pattern
combination.
Step 6
Press the memory/recall button and the stored
combination will appear on the LCD screen.
66