Advertisement
STep 8: (See fIGure 8)
•
Assemble a frame bracket to the R.H. foot rest. Use
two 3/8" x 1" hex bolts and two 3/8" lock washers.
•
Assemble a shoulder bolt (P) and a 3/8" flanged nut
(BB) (both supplied with the snow thrower) to the
frame bracket.
Proceed to step #14 on page 6.
•
FRAME
BRACKET
SHOULDER
BOLT (P)
(snow thrower)
3/8" FLANGED NUT (BB)
(snow thrower)
FIGURE 8
Steps #9 thru #13 for tractors with 54" mower decks.
STep 9: (See fIGure 9)
Only for 54" mower decks
•
Remove and store the mower stop bracket and bolt
from both sides of the tractor frame.
•
Remove the two bolts from the bottom of the foot
rests on both sides of the tractor frame.
54" MOWER DECKS
REMOVE
FIGURE 9
4
3/8" x 1"
HEX BOLT
3/8" LOCK
WASHER
RIGHT SIDE VIEW
REMOVE
RIGHT SIDE VIEW
STep 10: (See fIGure 10)
Only for 54" mower decks
•
Assemble the 54" R.H. hanger bracket to the holes on
the right side of the tractor frame where the mower stop
bracket was removed. Fasten with two 3/8" x 1" hex
bolts, two 3/8" lock washers and one 3/8" nylock nut.
54" MOWER DECKS
3/8" NYLOCK
NUT
3/8" x 1"
HEX BOLT
FIGURE 10
STep 11: (See fIGure 11)
Only for 54" mower decks
•
Assemble the 54" L.H. hanger bracket to the holes
where the mower stop bracket was removed on the left
side of the tractor frame. Fasten with two 3/8" x 1" hex
bolts, two 3/8" lock washers and two 3/8" nylock nuts
54" MOWER DECKS
L.H. HANGER
BRACKET (54")
3/8" x 1"
HEX BOLT
3/8" LOCK
WASHER
FIGURE 11
Call 1-866-576-8388 for missing parts or assembly help
3/8" LOCK
WASHER
R.H. HANGER
BRACKET (54")
3/8" x 1"
HEX BOLT
3/8" LOCK
WASHER
RIGHT SIDE VIEW
3/8" NYLOCK NUT
LEFT SIDE VIEW
DO NOT RETURN TO STORE
Advertisement
