Yamaha YFZ45RB Owner's Manual page 35

ECB00090
NOTICE
Never turn an adjusting mechanism beyond
the minimum and maximum settings.
TIP
Although the total number of clicks or turns of a
damping force adjusting mechanism may not ex-
actly match the following specifications due to
small differences in production, the actual number
of clicks or turns always represents the entire ad-
justing range. To obtain a precise adjustment, it
would be advisable to check the number of clicks
or turns of each damping force adjusting mecha-
nism and to modify the specifications as neces-
sary.
Spring preload
1. Remove the cowling. (See page 8-11 for
YFZ45RB or 8-14 for YFZ45RSEB.)
2. Remove the clip from the hose holder, remove
the bolt, and then move the blow-by gas
chamber away from the vehicle.
3
1 2
1. Hose holder
2. Clip
3. Bolt
4. Blow-by gas chamber
3. Loosen the clamp screw at the air filter case
side.
4-17
4
4