Yamaha YFZ45RB Owner's Manual page 108

2
1
1. Tailpipe bolt
2. Tailpipe
2. Remove the tailpipe by pulling it out of the
muffler.
8
3. Tap the tailpipe lightly, and then use a wire
brush to remove any carbon deposits from the
spark arrester portion of the tailpipe and inside
of the tailpipe housing.
1. Tailpipe
2. Spark arrester
4. Insert the tailpipe into the muffler and align the
bolt holes.
5. Install the bolt and tighten it to the specified
torque.
Tightening torque:
Tailpipe bolt:
8 Nm (0.8 m·kgf, 5.8 ft·lbf)
6. Remove the purging bolt and the gasket.
8-28
1
2