Default Setting; Basic Operation (Front Control Panel Layouts) - NEC MultiSync LCD1970NX Service Manual

3. Default Setting

Item
Power Supply
Input Freq.
BRIGHTNESS
CONTRAST
Color Temp.
OSM TRUN OFF
OSM LOOK OUT
Resolution notifier
OSM Setting
OFF TIMER
OSD/OSM
SETTING
URL SETTING
HOT KEY
LANGUAGE

4. Basic Operation (Front Control Panel Layouts)

(1) MENU/EXIT
(2) 4 Direction Control Key
(3) SELECT/1
(4) RESET
(5) Power LED
(6) POWER
AC100V~240V
1280×1024@75Hz
100%
50%
NATIVE
45 sec.
NO
ON
OFF
OSM
WWW.NECMITSUBISHI.COM
ON
ENGLISH
(1)
(2) (3)
BUTTON
Left/Right
Down/Up
2
Condition
(4) (5)
Open OSM main menu. Exits the OSM controls.
Exits to the OSM main menu.
Moves the highlighted area left/right to select control
menus.
Moves the bar left/right to increase or decrease the
adjustment.
Moves the highlighted area down/up to select one of the
controls.
Active Auto Adjust function. Enter the OSM sub menu.
Resets the highlighted control menu to the factory
setting.
Power LED, is green when monitor is on; amber when in
power saving mode.
Switch on/off monitor power.
4-3
(6)
MENU