Setting Up The Monitor; Attaching The Monitor Base - HP ENVY 23 IPS User Manual

2

Setting Up the Monitor

To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other
attached devices, then follow the instructions below.

Attaching the Monitor Base

CAUTION:
cause damage.
TIP: Consider the placement of the display, because the bezel might cause interfering reflections
from surrounding light and bright surfaces.
1. Lift the monitor from its box and place it face down on a flat surface.
2. Attach the base to the stand (1) and turn the screw (2) until it is finger tight to secure the base to
the stand.
2 Chapter 2 Setting Up the Monitor
The screen is fragile. Avoid touching or applying pressure to the screen; doing so can