Mk6I™ Spj+ W/Pss And Mk6I Spj+ W/Acc Joystick Switches And Indicators - Invacare Pronto M51 Base Owner's Operator And Maintenance Manual

MK6i™ SPJ+ w/PSS and MK6i SPJ+ w/ACC Joystick
Switches and Indicators
NOTE: For this procedure, refer to FIGURE 5.3.
On/Off
Button
Decrease
Speed Button
(Tortoise)
GREEN
LED
*NOTE: The mode button is only
present on SPJ+ w/ACC joystick.
FIGURE 5.3 MK6i™ SPJ+ w/PSS and MK6i SPJ+ w/ACC Joystick Switches and Indicators
On/Off Button
This button is located at the front of the joystick housing. It is used to turn the wheelchair
On and Off, to remove the joystick from sleep mode (if programmed) and to lock or
unlock the joystick (if programmed).
Speedometer
The speedometer is used to show the maximum speed. The right‐most LED indicates
current maximum speed setting. The bottom left GREEN LED flashes to indicate that the
joystick is in speed limit mode. Speed limit mode limits the drive speed to a pre‐
programmed value, typically when the seat has been elevated and the wheelchair is
required to drive at 20% speed.
Part No. 1148076
SECTION 5—WHEELCHAIR OPERATION
Gauge Display
Service Indicator
31
Information
Mode Button*
Speedometer
Increase
Speed Button
(Hare)
DETAIL "A" -
FRONT VIEW
®
Pronto M51
Joystick
Not
Active
Additional Input
for Powered
Seating Switch
Charger/
Programming
Input
™ ®
Base with SureStep