Teletext - Loewe TV set Operating Instructions Manual

Teletext – systems/switching teletext on/off
Switch on teletext:
VT
TOP operating system
- + Index
FLOF operating system
Listings Previews Films Features
Loewe operating system if no TOP/FLOF
- + no TOP/FLOF
Switch back to TV mode:
TV
VT
or
Teletext signals are broadcast together with the TV signal. Teletext transmits information in
word and graphics, e.g. news, weather, sport, program previews and subtitles. The
teletext pages are sorted according to subjects, topics and pages. You can select from
different subjects and topics and leaf through the pages.
Good reception is a precondition; i.e. little „ghosting" and no „noise" in the TV picture.
Sometimes the standard frequencies are not kept exactly in satellite receptions and
community antenna systems. Fine tuning is necessary in this case.
If picture errors still persist on certain programs, ask your dealer to have a look at your
antenna system.
Teletext is broadcast in most programs in the TOP operating system (or the FLOF system
abroad). Your Loewe TV set supports both these systems.
Teletext without these systems are also easy to operate with your Loewe TV.
Switching on the teletext
Press the
the overview page 100.
If you switch to teletext mode immediately
Aktuelles
after switching on the set or changing
programs, <TOP/FLOF identification
working> will be visible for a short time in
the menu line.
If TOP is recognized, you will see
four coloured fields in the menu line which
have a specific relationship to the buttons
of your remote control. These are the
buttons
block. These buttons have coloured circles
which are arranged in the same order and
have the same colours as on the screen.
These have the functions:
with red –
with green +
with yellow
with blue
Switching back to TV
Switch back to TV mode with the
button.
VT
button. You will normally get
VT
below the number
turn back page
turn forward page
go to next topic
go to next subject.
or
TV
If you switch back to TV mode from teletext
and you have not changed the program or
switched off the set, the page last displayed
is shown when you switch back to teletext.
If the FLOF operating system is
recognized, you will usually get the index
page, e.g. page 200, instead of page 100.
The possible selections are entered in a
coloured script or on a coloured background
in the menu line.
Not all pages need necessarily be FLOF
pages so that <no TOP/FLOF> may appear
when you are leafing through the pages.
If no operating system is recognized,
the LOEWE operating system is activated.
<no TOP/FLOF> appears in the menu line.
If no teletext is broadcast, <no text>
flashes in the menu line.
83