Sony BDV-IT1OOOES Operating Instructions Manual page 35

Front speaker Surround speaker
Center speaker
--=:::;;...""'"::~
Ex. Front speaker
Color tube Connector
Insert the speaker cords into the speaker terminal of the speaker as far as they will go. Ensure that
the cords are secure by gently pulling on them one at a time.
~~~eCk
the polarity on the label
-
• When assembling, take care not to touch the speaker units.
iir:I
• When removing the speaker cords from the speaker terminals, puB out the speaker cords while pressing the
white button on the speaker terminal with a tool such as a flathead screwdriver.
35
US
Use the speaker cords as follows:
• Front left speaker (L): White
• Front right speaker (R): Red
• Surround left speaker (L): Blue
• Surround right speaker (R): Gray
• Center speaker: Green
The connector and color tube of the speaker cords are the same color as the label of the jacks to be
connected. Be sure to match the speaker cords to the appropriate terminals on the speakers: the
speaker cord with the color tube to
<±),
and the speaker cord without the color tube to
e.
Do not
catch the speaker cord insulation in the speaker terminals.
4
Connect the speaker cords to the speaker.
Thread the speaker cord through the holes in the bracket (bottom).