Symptom
Bonus contents or other data that
are contained in aBO-ROM
cannot be played.
A message indicating that the
local storage does not have
enough space appears on the
screen.
Remedy
• Try the fol1owing:
<D
Remove the disc.
®
Turn the system off.
®
Remove and
re-insert the external memory (page 55).
@
Turn the system on.
®
Check that
the EXTERNAL indicator lights up in the front panel display.
®
Insert the BD-
ROM with BonusView.
• Delete unnecessary data in the external memory (page 69).
The unit does not work and
• Set the child lock function to off (page 106).
"CHILD LOCK" appears in the
front panel display when you
press any button on the unit.
The $·AIR function
Symptom
S-AIR connection is not
established (sound transmission
is not established), e.g., the
indicator of the S-AIR sub unit
does the fol1owing:
• Turns off.
• Flashes.
• Turns red.
No sound is heard from the
S-AIR sub unit.
Remedy
• If you use another S-AIR main unit, place it more than 8 m (26
1/4
feet) away
from the unit.
• Confirm the 10 of the unit and S-AIR sub unit (page 89).
• You performed pairing the unit and another S-AIR sub unit. Perform pairing of
the desired S-AIR sub unit (page 92).
• The unit is paired to another S-AIR sub unit. To cancel pairing, reset the 10 of
the unit and S-AIR sub unit (page 89).
• Install the S-AIR main unit and S-AIR sub unit away from other wireless
products.
• Stop using another wireless product.
• The S-AIR sub unit is turned off. Make sure the AC power cord (mains lead) is
connected and turn on the S-AIR sub unit.
• If you use another S-AIR main unit, place it more than 8 m (26
)/4
feet) away
from the unit.
• Confirm the 10 of the unit and S-AIR sub unit (page 89).
• Confirm the pairing setting (page 92).
• Install the S-AIR main unit and S-AIR sub unit closer together.
• Avoid use of equipment that generates electromagnetic energy, such as a
microwave oven.
• Instal1 the S-AIR main unit and S-AIR sub unit away from other wireless
products.
• Stop using another wireless product.
• Change the [S-AIR RF Change] setting (page 94).
• Change the
10
settings of the S-AIR main unit and S-AIR sub unit.
• Turn off the system and S-AIR sub unit, then turn on them.
-
~
Q,
::;
O·
::::J
D»
-
5'
cr
. .
3
D»
-
o '
::::J
There is noise or the sound skips. • If you use another S-AIR main unit, place it more than 8 m (26
'/4
feet) away
from the unit.
• Install the S-AIR main unit and S-AIR sub unit closer together.
• Avoid use of equipment that generates electromagnetic energy, such as a
microwave oven.
• Install the S-AIR main unit and S-AIR sub unit away from other wireless
products.
• Stop using another wireless product.
• Change the [S-AIR RF Change] setting (page 94).
• Change the 10 settings of the S-AIR main unit and S-AIR sub unit.
127
US