Bluetooth Setup; Setting The Bluetooth Connection (Bt In); Setting Auto Pairing With Ipod/Iphone; Setting The Bluetooth Device - Alpine CDE-153EBT Owner's Manual

00ALPINE.book Page 24 Friday, November 1, 2013 11:52 AM

BLUETOOTH SETUP

The following steps 1 to 5 are common to the various BLUETOOTH
functions. For details, refer to each individual function.
Note
• Set BT IN to ON, and then perform BLUETOOTH SETUP operation.
Refer to "Setting the BLUETOOTH Connection (BT IN)" on page 24.
1
Press and hold AUDIOSETUP for at least 2 seconds to
activate the SETUP mode.
2
Turn the Rotary encoder to select "BLUETOOTH", and then
press ENTER.
The BLUETOOTH setup mode is activated.
3
Turn the Rotary encoder to select the desired items, and
then press ENTER.
BLUETOOTH:
*
BT IN  USB PAIR  PAIRED DEV  VISIBLE M 
CALL SOUND  CALLER ID  PB UPDATE
AUTO ANS  SPEAKER SL  FW VERSION 
*
FW UPDATE
* The items are not displayed during a phone call.
4
Turn the Rotary encoder to change the settings.
5
Press and hold AUDIOSETUP for at least 2 seconds.
The SETUP mode is cancelled.
Notes
• Press t to return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Setting the BLUETOOTH Connection
(BT IN)
With BLUETOOTH technology, you can place a hands-free call by a
BLUETOOTH-equipped Smartphone.
Audio information of a BLUETOOTH compatible Smartphone, a
portable audio player, etc., is controllable/playable wirelessly from this
unit.
 Setting item: BT IN
Setting contents:
OFF / ON (Initial setting)
OFF:
Hands-Free Phone function and BLUETOOTH Audio function are
not used.
ON:
Select when you want to pair your BLUETOOTH compatible phone
with this unit or use BLUETOOTH Audio function.
Note
• When BT IN is set to OFF, the indicators related to Hands-free phone
(c battery charge) will not be displayed.
24
-EN

Setting Auto Pairing with iPod/iPhone

By setting this item to ON, the unit will auto pair when an iPod/iPhone
is connected to this unit via the USB port.
 Setting item: USB PAIR
Setting contents:
OFF / ON (Initial setting)
OFF:
Turn off the auto pair function.
ON:
Auto pair when an iPod/iPhone is connected to this unit via the
USB port.
Note
• USB Auto-Pairing cannot take place if either device has been paired

Setting the BLUETOOTH Device

Select one of 5 connected BLUETOOTH compatible devices that you
*
 PB ORDER 
previously registered.
 Setting item: PAIRED DEV
1
Turn the Rotary encoder to select a BLUETOOTH
compatible device you want to use (you want to change
connection), and then press ENTER.
2
Turn the Rotary encoder to select "CONNECT" to connect
the selected device.
The connected device is marked with "l". Select "DISCONNECT"
to disconnect this device. Select "CLEAR" when you want to clear
the device from the device list.
Notes
• If the connection is successfully changed, "CONNECTED" is displayed
for 2 seconds and the  indicator lights up, then the display returns to
the SETUP screen.
• If a Smartphone is connected to this unit successfully, the
lights up to show the battery charge of the connected Smartphone.
• Depending on the connected Smartphone, the
indicator may not be displayed.
• A total of 5 devices can be registered. If a 6th device is registered, the
earliest registered device will be deleted automatically.

Setting the Visible Mode

You can set whether this unit can be recognised or not from a
BLUETOOTH compatible device. Normally set this to VISIBLE M ON.
 Setting item: VISIBLE M
Setting contents:
VISI M ON (Initial setting) / VISI M OFF
VISI M ON:
Enable recognition of this unit from the BLUETOOTH compatible
device.
VISI M OFF:
Disable recognition of this unit from the BLUETOOTH compatible
device.
previously. Make sure the device name of both has been deleted
from each device.
indicator
(battery charge)