Table of Contents
Advertisement
III. INSTALLATION
3. Parallel Printer Connector (25-pin Female)
You can enable the parallel port and choose the IRQ through "Onboard Parallel
Port" in Chipset Features Setup of the BIOS SOFTWARE. NOTE: Serial print-
ers must be connected to the serial port.
4. Serial Port COM1 and COM2 Connectors (Two 9-pin Male)
The two serial ports can be used for pointing devices or other serial devices. See
"Onboard Serial Port..." in Chipset Features Setup of the BIOS SOFTWARE.
5. RJ-45 Connector (8-pin Female)
This connector can be used to connect the onboard 32-bit 10/100 Mbps Ethernet
LAN Controller (optional) to a host or a hub.
Parallel Port (25-pin Female)
COM 1
Serial Ports (9-pin Male)
ASUS XG-DLS User's Manual
COM 2
RJ-45 Connector
Ethernet Port
27
Advertisement
Table of Contents
