Central Processing Unit (Cpu) - Asus XG-DLS User Manual

Dual xeon atx motherboard

Hide thumbs Also See for XG-DLS:

Table of Contents

3. Central Processing Unit (CPU)

This motherboard provides two Single Edge Contact (SEC) Slot 2 connectors for

either one or two Intel

only one processor is used, the other Slot 2 connector must be terminated with the

provided front side bus termination module.

NOTE:

The pictures in the following pages will have the same item numbers

next to them for your reference. The following pictures are for reference only

and are not to size. The design and color of your items may be slightly different.

You should check to see that you have the following items with your motherboard:

(Item 1) Metal Baseboard x 1

(Item 2) Rubber Pad x 1

(Item 3) Retention Mechanism x 2

NOTE: For the retention mechanism and lock bar, there is a left and a right side. The left side has a single

dot and the right side has two dots (when holding the motherboard with the ATX connectors to the left).

(Item 4) Captive

Nut x 15 (in bag)

III. INSTALLATION

Xeon™ processors packaged in an SEC cartridge. When

(Item 5) Cartridge

Lifter x 4

ASUS XG-DLS User's Manual

(Item 6) Retention Mechanism Brace Bar x 2

(Item 7) Front Side Bus Termination Module

(Item 8) Retention Mechanism Cap x 2

(Item 9) Retention Mechanism Support Frame x 2

Table of Contents