Samsung ML-7300 User Manual page 54

Item
RESET NIC
CFG NET
TCP/IP
CFG TCP
LPD
DHCP
CFG ADRS
BOOTP
RARP
APL TALK
NETWARE
Values and Functions
The PortThru card is reset.
YES
NO
This menu item lets you configure network settings.
ON
OFF
This menu item lets you enable TCP/IP.
YES
NO
This menu item lets you configure TCP/IP.
ON
OFF
This menu item lets you print using LPD.
YES
NO
You can configure the print server for TCP/IP
configuration parameters, DHCP, CFG ADRS, BOOTP, and
RARP. When you enable TCP/IP protocol, you have to select
one of the IP Address assignment methods, DHCP, CFG
ADRS, BOOTP, RARP. In case of DHCP, RARP, BOOTP, you
need to configure the server. In case of CFG ADRS, you
have to enter the IP address, Subnet mask, Default
Gateway manually.
ON
OFF
When you set APL TALK to OFF, this PortThru can not be
detected by Macintosh systems.
ON
OFF
You can configure the printer server for IPX/SPX
configuration parameters, and FRAME. When you set it to
ON, you may select the Frame Type.
NETWORK MENU
3.19
U O P
SING PERATOR ANEL