PS(PostScript) Problems
Problem
The Error messages
(This job contains
binary data...) are
printed.
The Optional Tray2 is
not selected in PS
driver.
Network Problems
Problem
You cannot see any of
DHCP server, BOOTP
server or RARP server,
when you want to set IP
address to print server.
7.10
P
S
ROBLEM
OLVING
1
Open the Properties of PS driver.
2
Click on PostScript.
3
Click on the Advanced button.
4
The pure binary data is not supported.
Choose the others.
1
Open the PS driver Properties.
2
Set 'Optional Tray 2' item of Device Option to
installed.
There are two methods.
•
On the printer front panel, you can set IP
address in Network Menu. You can find the
following menu.
"NETWORK MENU
CFG TCP
CFG ADRS"
Solution
Solution
CFG NET
TCP/IP