group, scroll to an existing access point, and select
Options
Organise
>
>
To change the priority order of access points within a
group, scroll to an access point, and select
Organise
Change
priority.
>
Packet data access points
Select
Menu
Ctrl. panel
>
Destinations
Access
>
on the display. Or, open one of the access point groups,
and select an access point marked with
Use the instructions provided by your service provider to
edit the following:
Access point name
•
provided by your service provider.
User name
— The user name may be needed to make
•
a data connection, and is usually provided by your
service provider.
Prompt password
— If you want to set the device to
•
ask for a password every time you log in to a server, or
if you do not want to save your password in the device,
select Yes.
Password
— A password may be needed to make a
•
data connection and is usually provided by your service
provider.
Authentication
— Select
•
password encrypted or
encrypted when possible.
Homepage
— Depending on the access point type you
•
are setting up, enter the web address or the address of
the multimedia message centre.
Use access point
— Select
•
the device to ask for confirmation before the
Copy to other
dest..
Options
Settings
and
Connection
>
point, and follow the instructions
.
— The access point name is
Secure
to always send your
Normal
to send your password
After confirmation
connection using this access point is created, or
Automatically
destination using this access point automatically.
Select
Options
>
following:
Network type
•
transfer data to and from your device. The other
settings depend on the selected network type.
>
Phone IP address
•
of your device.
DNS addresses
•
and secondary DNS servers, if required by your service
provider. To obtain these addresses, contact your
internet service provider.
Proxy server address
•
server.
Proxy port number
•
proxy server.
WLAN internet access points
Select
Menu
>
Destinations
>
on the display. Or, open one of the access point groups,
select an access point marked with
Options
> Edit.
Use the instructions provided by your service provider to
edit the following:
WLAN network name
•
Search for
networks. If you select an existing network,
WLAN network mode
determined by the settings of its access point device.
to set
Network status
•
is displayed.
to set the device to connect to the
Advanced settings
and from the
>
— Select the internet protocol type to
(for IPv4 only) — Enter the IP address
— Enter the IP addresses of the primary
— Enter the address of the proxy
— Enter the port number of the
Ctrl. panel
Settings
and
>
Access
point, and follow the instructions
, and select
— Select
Enter manually
and
WLAN security mode
— Define whether the network name
Connection
>
or
are
97