Access Points; Create A New Access Point; Create Access Point Groups - Nokia E52 User Manual

Configurations
•
from which your device may receive configuration
settings.

Access points

Create a new access point

Select Menu Ctrl. panel
>
Destinations.
You may receive access point settings in a message from
a service provider. Some or all access points may be preset
for your device by your service provider, and you may not
be able to change, create, edit, or remove them.
When you open one of the access point groups (
), you can see the access point types:
indicates a protected access point
indicates a packet data access point
indicates a wireless LAN (WLAN) access point
Tip: You can create internet access points in a WLAN
with the WLAN wizard.
To create a new access point, select
device asks to check for available connections. After the
search, connections that are already available are shown
and can be shared by a new access point. If you skip this
step, you are asked to select a connection method and to
define the settings needed.
To edit the settings of an access point, open one of the
access point groups, and select an access point. Follow the
instructions from your service provider.
96
Connection name
•
— View and delete trusted servers
and Connectivity
Access
— Enter a name for the connection.
Data bearer
•
Depending on the data connection you select, only certain
setting fields are available. Fill in all fields marked with
Must be defined
empty, unless your service provider has instructed
otherwise.
To use a data connection, your service provider must
support this feature, and if necessary, activate it for your
>
SIM card.

Create access point groups

Select Menu
Destinations.
Some applications allow you to use access point groups to
, ,
connect to a network.
To avoid selecting which access point to use every time
the device attempts to connect to a network, you can
create a group that contains various access points, and
define the order in which the access points are used to
connect to a network.
For example, you can add wireless LAN (WLAN) and packet
data access points to an internet access point group and
use the group for browsing the web. If you give the WLAN
point. The
access point the higher priority, the device connects to the
internet through a WLAN if available and through a packet
data connection if not.
To create a new access point group, select
Manage
>
To add access points to an access point group, select the
group and
existing access point from another group, select the
— Select the data connection type.
or with a red *. Other fields can be left
Ctrl. panel Settings
> >
New destination.
Options New access
>
and Connection
>
Options
>
point. To copy an