Nokia E52 User Manual page 80

Pair devices
Select Menu Ctrl. panel
>
Bluetooth.
Open the paired devices tab.
Before pairing, decide on your own passcode (1-16 digits),
and agree with the user of the other device to use the same
code. Devices that do not have a user interface have a fixed
passcode. You need the passcode only when you connect
the devices for the first time. After pairing, it is possible to
authorise the connection. Pairing and authorising the
connection makes connecting quicker and easier, as you
do not have to accept the connection between paired
devices every time you establish a connection.
The passcode for remote SIM access must have 16 digits.
In remote SIM mode you can use your device's SIM card
with compatible accessories.
When the wireless device is in the remote SIM mode, you
can only use a compatible connected accessory, such as a
car kit, to make or receive calls.
Your wireless device will not make any calls, except to the
emergency numbers programmed into your device, while
in this mode.
To make calls, you must first leave the remote SIM mode.
If the device has been locked, enter the lock code to unlock
it first.
1. Select Options
starts to search for Bluetooth devices within range. If
you have sent data using Bluetooth connectivity
before, a list of the previous search results is displayed.
To search for more Bluetooth devices, select
80
devices.
Connectivity
>
New paired device. The device
>
2. Select the device with which you want to pair, and
enter the passcode. The same passcode must be
entered in the other device as well.
>
3. To make the connection between your device and the
other device automatic, select Yes. To confirm the
connection manually every time a connection attempt
is made, select No. After pairing, the device is saved to
the paired devices page.
To give a nickname to the paired device, select
Assign short
device.
To delete a pairing, select the device whose pairing you
want to delete and
pairings, select
connected to a device and cancel the pairing with that
device, pairing is removed immediately, and the
connection is ended.
To allow a paired device to connect automatically to your
device, select
your device and the other device can be made without
your knowledge. No separate acceptance or authorisation
is needed. Use this status only for your own devices, such
as your compatible headset or computer, or devices that
belong to someone you trust. If you want to accept
connection requests from the other device separately
every time, select
To use a Bluetooth audio accessory, such as a Bluetooth
handsfree or headset, you need to pair your device with
the accessory. For the passcode and further instructions,
see the accessory user guide. To connect to the audio
accessory, switch on the accessory. Some audio
More
accessories connect automatically to your device.
name. The nickname is displayed in your
Options > Delete. To delete all
Options Delete all. If you are currently
>
Set as authorised. Connections between
Set as unauthorised.
Options
>