To Reset The Telephone To The Initial State (Reset); Registering The Additional Remote Sets; (In The Standby State); Registering The Additional Remote Sets (In The Standby State) - Samsung SP-C802R User Manual

Help Function
To reset the telephone to the initial state
This function refers to
resetting the telephone to
the default state.
Base set
Remote set
In the standby state,
Standby State
Telephone Initial State
Base set
● Flash Time: 0.4 seconds ● Password (Remote Control): 0000
● Caller Identification: Activiated
● Ringer Type: No. 0
● Morning Call: 6'clock (Deactivated)
● Auto Answer: Deactivated
● Current Time: 12:00
● Speakerphone Volume: Level 3
● Ringer Volume: Middle
● Dialing Mode: Rotary Dialing
● Speaker Volume: Level 6
● Toll Restriction: Deactivated
● Speech Volume: Level 3
● Remote answering bell count
(when setup) : 3 times
● Remote answering bell count
(when released) : 3 times(15 times)
● Directory: None
● Last Dialed Number: None
● Display Screen Type: No.5
42
(Reset)
LCD displays �Reset is in
�
�
progress�, and the unit turns
to the standby state.
Connect the power adaptor jack with pressing
button, and hold the button for 3 seconds or more.
LCD displays
and press
� �Reset...� , and the unit
at the same time.
beeps.
Remote set
● Ringer Volume: High
● Speech Volume: Middle
● Remote set LCD:
No. 1 (Remote set)
● Ringer Type: No. 1
● Last Dialed Number: None
● Directory: None
Help Function

Registering the additional remote sets

At the base set
1
�
Registering at the
remote set
�
Or
At the remote
2
set
�
● If you press the button late, it may not be set. So, press it quickly.
Designating the remote
When the remote set is not on the charger, press the following buttons when
set (extension numbers)
the line is idle.
REFERENCE
● At the time of purchase, the remote set is set as Extension No.1.

(In the standby state)

Select the same 2-digit
number as that of the
� �
remote set.
If you selected at the
remote set, press .
Select the same 2-digit number
�
as that of the remote set.
When the remote set is not on the charger, press the
following buttons when the line is idle.
2-digit registration
� �
number.
You can select a number
from 00~99. If it is
press.
To set it to No. 1
� � �
To set it to No. 2
To set it to No. 3
Remote set No.
(Extension No.)
�
�
�
,
43