Advanced Functions for Auto Answering
Selecting the auto-answering ring count (when setup)
�
● Select "0" to make the bell ring three times for a new voice message, and 6 times for no new
voice message.
Selecting the auto-answering ring count (when released)
�
● If you become unable to take calls without activating the auto answering function, �I' m not
able to take your call now. Please call again later� message is transmitted to the calling party
after the telephone rings as many times as the set remote answering ring count, and then the call
is automatically terminated.
● You can set the auto answering function from the outside through the remote control (See page 39).
� 10 times
� 12 times
How to use auto-answering function outside
(auto-answering)
How to change the password
You can control the
telephone state by making a
�
call to your phone from the
outside.
At this time, you have to
know the password. At the
time of purchase, the
password for remote control
How to use the auto answering function from the outside
is set to 0000.
(To change the password, do
Turn on the auto
as shown here.)
answering machine
when you go out
Enter the password.
(It is set to 0000 at the time
of purchase.)
※ If you become unable to take calls without turning on the auto answering machine, the
telephone rings as many times as the set remote answering ring count (15 times as
default) and then the answering message is transmitted.
To use the auto-answering function outside, the phone should be in tone dialing mode.
If the buttons are not properly entered at the time of remote control from the
outside, press and shortly hold the buttons.
38
�
�
�
�
�
�
�Unlimited
� 15 times
(Until the handset is picked up)
� 20 times
�
�
Enter a new
4-digit password.
Make a call to your
While the answering
�
�
telephone from the
message is being
outside.
transmitted
Press the desired button,
�
referring to the function table on
Page 39.
Advanced Functions for Auto Answering
Table of functions available from the outside (Remote Control)
To use these functions
�
To check unheard messages
To check the next message
�
To check the previous
message
To stop the message being
played
To delete the message being
played
To activate or deactivate the
auto answering function
To stop the remote control
�
Table of functions available with the remote set
�
To unit these functions
To check the recorded messages
Press the following button
(Being played)
(Being played)
(Being played)
(Being played)
Press the following button
with the remote set
Like this
After the number of received
messages is announced, the
messages are played.
Whenever you pressed
button,
the auto answering function is
activated and then deactivated.
Like this
Previous Message
�
Next Message
Stop Message
39