Advertisement
6. Repeat STEPS 2‐5 for the other back cane, ensuring that the back height selected
in STEP 5 is the same for both back canes.
7. Secure the back upholstery to the new back canes with the existing mounting
screws and washers (Detail "A").
DETAIL "A"
Washer
Mounting Screws
Back Upholstery
Wheelchairs
manufactured
before 11/01/05)
Mounting
Screws
Invacare Corporation
USA
One Invacare Way
Elyria, Ohio USA
44036-2125
800-333-6900
MADE IN MEXICO
Back Canes
19 inches High
17 inches High
15 inches High
Washer
DETAIL "C"
Back Cane
Back Cane
Wheelchair
Wheelchair
Frame
Locknuts
Mounting
Screws
FIGURE 1 Replacing Back Canes
www.invacare.com
Canada
570 Matheson Blvd. E Unit 8
Mississauga Ontario
L4Z 4G4 Canada
800-668-5324
DETAIL "B"
Wheelchairs
manufactured
after 11/01/05
Frame
Locknuts
Spacers
Invacare, the Medallion Design, and
Yes, you can. are registered
trademarks of Invacare Corporation.
©2005 Invacare Corporation
Part No 1046525
Rev C - 12/6/05
Wheelchair
Frame
18 inches High
16 inches High
NOTE: The spacers
must be on the
outside of the
wheelchair in order
for the mounting
screws to be properly
tightened.
Advertisement
