Samsung DVD-V 90K Instruction Manual page 10

VCR
Presetting the Stations Automatically
Install
User Set
Auto Power Off : Off
Screen Messages : On
Auto Setup
Manual Setup
TV System : G
VCR Output CH : CH 36
Your data will be lost
Press OK to continue
Menu to exit
Please Wait
18
You do not need to preset the stations if you have already
set them automatically (see Plug & Auto Set Up on page 13).
Your DVD-VCR contains a built-in tuner used to receive television
broadcasts.
You must preset the stations received through the tuner. This can be
done:
You can store up to 50 stations.
1 After pressing the MENU, press the OK or ❿ .
Install
Result:
2
Press the corresponding
option.
3 Press the OK or ❿ to select this option.
Result:
4
Press the corresponding
is selected.
And then press the OK or ❿ to select this option.
Result:
Auto Setup
5
Press OK button.
Result:
6
Press OK to start the auto scanning.
Result:
Auto Setup
15%
7
If you wish to cancel the auto scanning before the end, press the
MENU button to exit the menu.
Plug & Auto Set up (see page 13)
Automatically
Manually (see page 19)
The Setup menu is displayed.
,
❷
The Install menu is displayed.
or
A message appears, indicating that any channels
already preset on your DVD-VCR will be deleted.
A message appears, indicating that any channels
already preset on your VCR will be deleted.
The Please Wait
television screen.
The first frequency band is scanned and the first
station found is displayed and stored.
The DVD-VCR then searches for the second station
and so on.
When the automatic scanning procedure has
finished, the DVD-VCR switches automatically to
programme 1.
The number of stations automatically stored by the DVD-
VCR depends on the number of stations that it has found.
Once the auto scanning procedure has finished, some
stations may have been stored more than once; select
the stations with the best reception and delete the ones
no longer required (see page 20).
buttons to select the Install
buttons, until the Auto Setup
❷
indication highlight on the