Peavey VIP 1 Operating Manual page 33

5 6
pre-gain low
P1 P2
edit mode
tap tempo
13
model presets
effects
push to edit/hold to bypass
looper
anytime you want access to the Delay or reverb you will need to enter Edit mode!
tap tEmpO
14
Tap on this button to set the tempo of the Delay effect. If you aren't hearing any delay enter Edit mode to
turn the level up.
uSb rECOrD Out
15
The VYPYR USB Record out requires no additional drivers—just plug a standard USB 2.0 cable into your
computer and it will detect it as an audio device. Open your favorite recording program and start recording.
Don't worry, the output is microphone/cabinet simulated and will sound great right in your computer.
NOtE: the speaker is intentionally muted when uSb output is in use although the headphone output
is active for real time monitoring. the uSb port can also be used to download firmware updates and to
connect to a computer to use the Vypyr Edit Graphic user Interface. mIDI works over the uSb as well.
aux INput
16
Plug in your favorite mp3 player, drum machine, or CD player and play along.
HEaDpHONE/rECOrD Out
17
We really spent a lot of time making sure the headphone jack was studio quality. Because of that, and with
the proper adapters (not supplied), you can use this output for recording as well as the USB port.
NOtE: When headphones are in use the speaker is muted and master Volume (Item 9) controls headphone level.
7 8
mid high
delay feedback delay level
VYPYR ®
14
pre-gain low
P1 P2 delay feedback
edit mode
tap tempo
9
post-gain
3
2
1
reverb level
VIP-3
mid high post-gain
delay level reverb level
VYPYR ®
10
master
6 7
5 8
4 9
10
11
12
0 13 1%
USB aux in phones
15 16 17
master
6 7
5 8
4
3
2
1
0
VIP-3
11
50%
power
sponge
100%
50%
9
power
10
sponge
11
12
13 1% 100%
USB aux in phones