Peavey VIP 1 Operating Manual page 31

5 6
pre-gain low
P1 P2
edit mode
tap tempo
13
EFFECtS ENCODEr
4
Turn this knob to select any "Rack" effect. These are effects you might find attached to the effects loop of an
amplifier. Press the encoder momentarily to enter Edit mode.
NOtE: this encoder also serves other functions, see preset Section for more information.
prE GaIN
5
Turn this knob to crank up the gain, think of it as how much distortion you want out of the amplifier. In Edit
mode this knob controls parameter 1 of either the selected Stompbox or Effect.
NOtE: this control must be low on the acoustic and bass presets to allow for clean undistorted sounds.
LOW ENCODEr
6
Low EQ adjustment. In edit mode this knob controls parameter 2 of either the selected Stompbox or Effect.
mID ENCODEr
7
Mid EQ adjustment. In edit mode this knob controls the Feedback of the Delay effect. Feedback is the
number of times the delay repeats.
7 8
mid high
delay feedback delay level
VYPYR ®
14
9
post-gain master
5
4
3
2
1
0
reverb level
VIP-3
11
10
6 7 50%
8
9
10
11
12
13 1%
USB aux in phones
15 16 17
power
sponge
100%