Redialing A Number; Displaying Information On Your Endpoint; Date, Time, Name, And Extension Number Display; Outside Party's Name/Number - Inter-Tel 8526 User Manual

R N
EDIALING A
The Redial feature allows you to quickly redial the last outside number you dialed.
Although most endpoints redial the last number dialed, your system administrator can
program your endpoint to redial the last number saved.
To use the Last Number Dialed feature:
Press
START
dialed.
To redial a number if your system uses the Last Number Saved feature:
•
To save a number: While the endpoint is idle or while listening to intercom dial
tone, press
•
To redial the saved number: While on a call or after selecting a line, press
FNC
D I
ISPLAYING NFORMATION ON
In addition to the four lines on the display that are dedicated to the menu, your end-
point has two lines of display where you can view information, such as the date and
time or the outside party's name/number.

Date, Time, Name, and Extension Number Display

You can temporarily display the system date and time, your user name, and your
extension number at any time.
To show the date and time display (while on a call, in do-not-disturb, etc.):
Press
START

Outside Party's Name/Number

If you are currently connected to an outside caller with Caller ID, you can toggle
between displaying the caller's name and number.
To show the outside party's name:
Press
START
NOTE:
If there is no outside party name available, the display shows CANNOT
ACCESS FEATURE.
®
Inter-Tel Model 8524/8525/8526 User Guide
UMBER
, , and dial . A line is selected automatically and the number is
FNC 7
and dial .
FNC 7
and dial . A line is selected automatically and the number is dialed.
7
and dial .
3 0 0
and dial .
3 7 9
Y E
OUR NDPOINT
31