Hard Disks Full Action Setup - EverFocus EDR1600 Administrator's Manual And Operating Instructions

Hide thumbs Also See for EDR1600:

Table of Contents

6.7 Hard Disks Full Action Setup

Operations:

After the HDDs Full Action menu item is selected, the HDDs Full

Action Setup dialog box will be shown on the screen.

Alarm A01

!"Auto Overwrite – Check this item to enable automatically overwrite

the recorded data from HDD#1 when the hard disk drive capacity

reaches the end. While Auto Overwrite is not enabled, the system

will not overwrite the recorded data until the Administrator or

Supervisor click on the Alarm Reset button. The default setting is

Auto Overwrite enabled. (Note)

!"Duration – Response duration to define how long (in seconds) the

Alarm Out relay and the Buzzer will keep after the full hard disk

capacity is detected. Use the Up/Down arrow buttons to adjust the

value (0-60 seconds).

!"Enable – Check to enable the Alarm Output when the full hard disk

The Hard Disks Full Actions allow the administrator to define how

the digital video recorder responds when the hard disk drives reach

the maximum storage capacity.

capacity is detected.

Administrator's Guide and Operating Instructions

Table of Contents