Table of Contents
Advertisement
5) The default phase of the spin speed is related to cotton items. Set the spin speed. Make
sure that it agrees with the laundry. To select the DRAIN programme only, set the function
NO SPIN.
6) Press EXTRA RINSE button to add rinses. With a low spin speed the appliance performs
delicate rinses and a short spin.
7) Set this programme to decrease the time and the consumption of energy and water. Use a
special detergent for very low temperature.
8) Standard programmes for the Energy Label consumption values. According to
regulation 1061/2010, the «ECO 60 °C» and «ECO 40 °C» are respectively the «standard 60
°C cotton programme» and the «standard 40 °C cotton programme». They are the most
efficient programmes in terms of combined energy and water consumptions for washing
normally soiled cotton laundry.
STEAM PROGRAMMES
1)
Programme
Steam Refresh
This cycle removes odours from the
laundry.
Steam does not remove ani-
mal odours.
Steam Anticrease
This cycle helps to dewrinkle the
laundry.
Steam can be used for dried, washed or worn once laundry. These pro-
grammes can reduce creases and odours and make your laundry more
soft.
Do not use any detergent. If necessary, remove stains by washing or using
localized stain removal.
Steam programmes do not perform any hygienic cycle.
Do not set the Steam programme for this type of items:
• items where it is not specified on the care label as being suitable for tumble-
drying
• all items with plastic, metal, wooden parts or alike.
1) If you set a Steam programme with dried laundry, at the end of the cycle the laundry feels
humid. It is better to expose the items to the fresh air for about 10 minutes to let the
humidity dry. When the programme is completed, quickly remove the laundry from the
drum. After a steam cycle, items may to be ironed anyway, but with less effort!
Type of load
Cotton and synthetic items
Cotton and synthetic items
ENGLISH
15
Max load
up to 1.5
Kg
up to 1.5
Kg
Advertisement
Table of Contents
