Sony Walkman NW-MS70D Operating Instructions Manual page 84

Troubleshooting (continued)
Symptom Cause/Remedy
The number of audio files that can be
checked out is limited. (Available
recording time is short.)
The free memory space of the medium (built-in flash memory Or
"Memory Stick") to where you want to check out audio files is not
enough for the size of audio files to be checked out.
+
Check in the unnecessary audio files and increase the free space.
Data other than audio files are stored in the media (built-in flash
memory or "Memory Stick") to where you want to check out audio
files.
+
Move the data other than audio files to the computer and increase
Any computer other than the computer used for Check-out is selected
for the Check-in target.
+
Audio files cannot be checked in to any computer other than the
The audio file has been deleted from the computer used for Check-
out.
+
The audio file cannot be checked in if the file is deleted from
the
the free space.
Audio files cannot be checked in.
computer used for Check-out.
computer used for Check-out.
Audio files are checked in
automatically when your Network
Walkman is connected
to
the computer.
If
an audio file is deleted from your Network Walkman using
SonicStage installed on any computer other than the computer used for
Check-out, the file will be checked in automatically when your Network
Walkman is connected to the computer that you used for Check-out.
Therefore, the remaining Check-out count increases automatically.
The "Memory Stick' is
not
inserted.
.
There is a
After connecting your Network
Walkman to the computer, "Memory
Stick" is displayed but files cannot be
found.
3
Insert the "Memory Stick".
+
Insert the "Memory Stick' and check the display of the Network
the
4 4 ~ ~ ~ ~
Stick".
Walkman while disconnecting the dedicated
USB
cable. If an error
message is displayed, follow the message. For details, refer to the
manual for your Network Walkman.
The operation of your Network
Walkman becomes unstable while it is
connected to the computer.
"The portable player is not
recognized." is displayed on the
computer screen while the Network
Walkman is connected to the comnuter.
A USB hub or USB extension cable is used.
+
Connecting via a USB hub or USB extension is not guaranteed.
Your Network Walkman cannot be operated under the circumstances.
Please consult the Sony service center.
Connect the dedicated USB cable directly to the computer.
"Access to
a devicejmedia failed." is
displayed when
YOU
select the media
(built-in flash memory Or "Memory
Stick") to be used on your Network
Walkman.
The error message may be displayed when you select the media (built-in
flash memory or "Memory Stick) in SonicStage.
+
Reconnect your Network Walkman to the dedicated USB cable or
select the media once again.
32