Sony Walkman NW-MS70D Operating Instructions Manual page 64

1
Insert the SonicStage installation CD-ROM into the CD-ROM drive of
The setup program starts up automatically. The SonicStage 1.5 installation window is displayed.
Click [SonicStage 1.51.
e on-screen instructions.
Do not delete, move, or edit the installed folders using Windows Explorer or any other application. It may cause
Do not quit installation or remove the CD-ROM while installing the software.
Do not install the software using a CD-ROM drive via a network. Always use the CD-ROM drive on the computer that
improper operation of the SonicStage software.
the software
is
installed into.
-e
Tip
While uninstalling the old version of the OpenMG Jukebox software, the message "Remove shared File?'' will be
displayed. Click [Yes to All]. And then click [Yes] when the message "Are you sure you want to proceed?" is displayed.
Installing only the driver file for the Network Walkman
After installing the SonicStage Ver. 1.5 software, you can install only the driver file for the Network
Walkman for the following cases as needed.
9
The Network Walkman connected to the
computer is not recognized.
The other model of the Network Walkman has been selected when you install the SonicStage Ver.1.5
To
instal1 only the driver file, insert the SonicStage installation
CD-ROM
into the CD-ROM drive of your
computer and select "Driver" in the step 2 above to install the corresponding driver file for your Network
W a1 kman
.
software.
If you hold old versions of the SonicStage or OpenMG Jukebox installation CD-
ROMs
You cannot overwrite the SonicStage Ver. 1.5 software with old versions of the software. If you
accidentally overwrite it with an
old
version, all stored audio files may be deleted.
rn
All stored audio files will be deleted if you uninstaIl the SonicStage Ver. 1.5 software and install old versions of the
software. Even when backing up using a back up tool, the restoration of audio files
on
the old version of the SonicStage
software is not guaranteed.
12