GE 25 Owner's Manual And Installation page 109

Temperature Degrees:
The temperature controls are preset in the factory at the recommended setting of
37°F for the refrigerator compartment and 0°F for the freezer compartment. The
temperature controls can display both the set temperature as well as the actual
temperature in the refrigerator and freezer. The actual temperature may vary
slightly from the set temperature based on usage and operating environment.
To change the temperature:
Press and release the warmer or colder pad.
1.
display will show the set temperature.
To change the temperature, tap either the warmer or colder pad until the
2.
desired temperature is displayed.
34°F and 44°F and the freezer temperatures can be adjusted between –6°F and +6°F).
Once the desired temperature has been set, the temperature display will return to
the actual refrigerator and freezer temperatures after 5 seconds.
To turn the cooling system off:
Tap the warmer pad for either the refrigerator or the freezer until the display
·
shows off
. (Setting either or both controls to off stops cooling in both the freezer and
refrigerator compartments, but does not shut off electrical power to the refrigerator).
To turn the unit back on:
Press the colder pad for either the refrigerator or freezer.
1.
illuminate on the side you selected).
2. Then press the colder pad again (on the side where the set light is
illuminated) and it will go to the preset points of 0°F for the freezer and 37°F
for the refrigerator.
Setting either or both controls to off stops cooling in both the freezer and
refrigerator compartments, but does not shut off electrical power to the
refrigerator.
Number Settings:
The temperature controls are preset in the factory at the recommended setting of
5 for both the refrigerator and freezer compartments.
To change the temperature:
· Tap either the warmer or colder pad until the desired temperature is
displayed.
(Refrigerator and freezer temperatures can be adjusted between 1-9).
Setting either or both controls to 0 stops cooling in both the freezer and
refrigerator compartments, but does not shut off electrical power to the
refrigerator.
Each time you adjust controls, allow 24 hours for the refrigerator to reach the temperature you
have set.
Note: Control settings will vary based on personal preferences, usage and operating conditions
and may require more than one adjustment.
The set light will come on and the
(Refrigerator temperatures can be adjusted between
(The set light will